Let’s bond together for the next few minutes to unravel the best concrete adhesives in the market and let it sticks out.
There is no doubt that adhesive products are a vital factor in any repairs or home makeovers. From sticking a towel holder in the bathroom to bonding two bricks in a new wall, the concrete adhesive could manage that in multiple ways.
So, in this article, we will adhere to the strict rules of reviewing and try to give the widest range of concrete bonding adhesive products to fulfill your needs.
Do not miss this and stick with us until you are 100% sure about the best construction adhesive!
Best Pick - Adhesive
Runner Up - Adhesive
Best Pick - Bonding Agent
Runner Up - Bonding Agent
We have reviewed best construction adhesives first and then concrete bonding agents. If you want to read the concrete bonding agents review only, click here.
Our Best Concrete Adhesive Reviews
1. Loctite Power Grab Express All‐Purpose Adhesive
A high strength all-purpose gap-filling adhesive with an instant grab, leaving no wasted time. Also, with its high tack, you will use fewer nails and screws for your repair jobs.
You can use the Loctite Power Grab Express All-Purpose Adhesive for paneling and fiberglass reinforced panel projects.
This product is also suitable for those who are sensitive to strong odors as it contains a very light-odor. It has also been GREENGUARD Indoor Air Quality Certified, and GREENGUARD Certified for Children and Schools.
A beneficial feature about this product is that it only requires water and soap to clean up, with no hassles of cleaning for hours on end.
This product holds very well on surfaces and has some flexibility. However, it depends on the surface as this product is aimed for use on concrete.
Although it has good holding power, this adhesive won’t work on plastic.
When using this adhesive on a wall, know that it may remove the entire top layer of the wall.
If you happen to get some of the adhesives on your hands, you can easily remove it by rubbing your hands back and forth.
Before you purchase this product, ensure that at least one item that you are gluing is porous, or the adhesive won’t work.
On the other hand, you may struggle with getting the adhesive out of the tube, so ensure that you keep it at room temperature at all times.
While the Loctite Power Grab Express All-Purpose Adhesive is not usually recommended for smaller applications, it works perfectly on furniture, with ceiling tiles, loose wood, and dryer vents. Therefore, we consider it the best concrete adhesive.
2. Gorilla 5021801 Glue
The Gorilla 5021801 Glue holds well to most surfaces. It can be used for anything, from woodworking to construction and even garage doors.
When you talk about the best concrete glues, this Gorilla glue must come at the top of the table.
It is one of the most favored glue choices due to its strong holding ability; once you apply it, it does not come off.
It’s great for fixing and repairing; it works well on wood, stone, metal, foam, glass, ceramic, and concrete.
While other glues do not expand, the Gorilla 5021801 Glue expands once applied; therefore, you end up using less product. Also, it fills in gaps in uneven joints.
Another impressive feature is that it is 100% waterproof. So, it will hold through even when liquid is applied to it or if it is exposed to outdoor elements like rain.
When applying this product, it expands 3 times into the materials creating a strong bond. Surprisingly, it also works well on foam, unlike other glues.
Gorilla 5021801 Glue has been formulated for tough repairs; however, it also works well on surfaces such as the sole of your sneakers. With just one small droplet, your torn sneakers will be like brand new again.
One of the downsides of this strong bonding glue is that it is quite messy. So, take extra caution when working with it indoors. If you happen to get some of this product on your clothes, it won’t come off.
If you don’t want hard glue stuck to your hands, I’d recommend you wear vinyl gloves.
3. E6000 High Viscosity Adhesive
A tough adhesive that contains twice as stronger than polyurethane and is also 60 times more flexible.
The E6000 High Viscosity Adhesive is suitable for most surfaces, including metal, wood, glass, fiberglass, ceramics, masonry, and concrete.
It is safe to use with surfaces that are exposed to dilute acids and dilute caustics as it is chemical resistant.
Once this product has set, you can expose it to freshwater, and it will not be damaged because the E6000 High Viscosity Adhesive is waterproof.
Another impressive feature of this product is that it is not affected by temperature. So, you can expose it to extreme heat or extremely cold temperatures.
As with most adhesives, this product tends to be quite messy. When applying, you may have sticky adhesive all over your fingers, which will create little rubber balls. However, this can be easily removed.
It has quite a thick consistency, which makes it slightly awkward to work within confined spaces. Therefore, it might make your job more difficult. Also, it has a consistency similar to silicone.
When using this product, allow it at least 24 hours to set.
Although it does not dry fast, it is paintable and thus provides versatility, unlike other adhesives.
This product is also used in the jewelry industry, due to its strong bonding properties. It is also non-flammable when cured.
4. Loctite PL Premium Polyurethane Construction Adhesive Review
A strong bonding adhesive that is suited for various uses, including construction. It is regarded as the best concrete adhesive for exterior applications.
It is a multipurpose product; you can apply this adhesive directly to wet-dry or frozen lumber.
This product is also good to use indoors as it has a very low odor compared to other adhesives.
Although this product is described as waterproof, it isn’t. Therefore, ensure that you’re using it on a surface that won’t be exposed to water.
The Loctite PL Premium Polyurethane Construction Adhesive can be used for repair work around the house. It’s also more reliable than metal nails.
Car doors, wooden fencing, furniture, and ceramic tiles can all be repaired or fitted with this product. It is also suitable in hot and cold temperatures.
Although this product has strong bonding properties, it could bubble up when applied to certain surfaces. When this happens, even it out as much as possible, using a flat utensil, to ensure that it gives off a smooth finish.
After applying the Loctite PL Premium Polyurethane Construction Adhesive, leave it for at least 24 hours to set. Although it takes longer to set compared to other adhesives, when it dries, it forms a rock-solid finish.
It is advisable to mist your materials with water if you are using this product to join non-porous material.
This product can cause a sticky mess, and to avoid having adhesive on your hands for several days, wear a pair of gloves. This product is not considered the duct tape of the adhesive world for nothing.
Also, this product is best used with roughened up surfaces. If your surface is very smooth, use some sandpaper. This will make it easier for the adhesive to bond.
5. Gorilla Heavy Duty Construction Adhesive Review
This strong adhesive lives up to its name. It’s heavy-duty adhesive and can bond almost anything. It works well with concrete, mirrors, drywall, landscaping, and marble.
It contains 100% adhesive and has no solvents or water. This makes the product more effective.
The Gorilla Heavy Duty Construction Adhesive can be used for indoor and outdoor projects. Whatever the weather conditions are, its strong bond formulation makes it weather resistant.
Its versatility and weather-resistance are the two key features that made us include it at the top 5 best construction adhesives list.
When using, ensure that all surfaces are clean, free of dirt, grease, and oil.
This product dries a pure white color and has a similar consistency to silicone sealer. So, it would be easier to paint over.
If it’s your first time working with this product, also note that you will need a caulking gun to use this adhesive.
The applicator can seem quite tricky. However, it is quite simple. Unscrew the applicator, then cut off the end of the tube, leaving the threads.
The most impressive feature is how clean this adhesive is to use. It does not drip or run, making it easy to use.
The time it takes to set can vary from 2-24 hours, depending on your application of the product. When it dries, it leaves a smooth, almost textured finish.
6. Liquid Nails LN-903 12 Pack Heavy Duty Construction Adhesive
It contains a very low solvent formula and has strong bonding ability. This product is recommended for indoor and outdoor use.
The Liquid Nails LN-903 12 Pack Heavy Duty Construction Adhesive is recommended for countertops, cabinets, brick veneer, and plywood.
This product has been certified by UL Environment, making it an environmentally safe and sustainable adhesive. Therefore, using this product will not harm the environment. Also, this adhesive meets the GREENGUARD Gold Standard as a low emitting material.
Although the Liquid Nails LN-903 12 Pack Heavy Duty Construction Adhesive is recommended for heavy-duty use, it’s not recommended for use on ceramics, flooring, marble, vinyl, and plastic.
While the Liquid Nails LN-903 12 Pack Heavy Duty Construction Adhesive has strong bonding properties, it will take 24 hours to set. However, when this product sets, it provides a strong and durable hold.
It is also water and weather resistant. Therefore, you may expose your product to extreme hot or cold weather, without damage.
This adhesive contains some impressive properties and uses; however, it is quite restrictive as it cannot be used for some surfaces.
7. XTREME Bond Masonry Adhesive for Wet or Frozen Surfaces
This product is a professional adhesive that is suited for use on concrete, stone, and retaining walls.
It contains just one component – premium polyurethane adhesive. Therefore, it contains a very high bonding strength.
The XTREME Bond Masonry Adhesive can be used for wet or frozen surfaces.
It creates a smooth texture when you apply it to a surface, and it sticks well. You have a time frame of about 15 minutes to work through the adhesive the way you want.
However, this product tends to form bubbles and causes a blister-like texture. Take this into consideration when looking for a good, quality adhesive.
This product also does not hold well to wet concrete. Therefore, this may pose a challenge if you’re considering an adhesive to be used on concrete.
While it is said to have high bonding properties, this product does not work well on vertical surfaces. It tends to run easily.
It also needs moisture to cure. When this product cures, it creates a hard surface.
Another important feature to note is that the XTREME Bond Masonry may pose a health hazard. It could irritate the eyes and nose. These symptoms could worsen with prolonged exposure to this product.
If you are intent on using this product, practice safety precautions, and handle the product with gloves at all times.
8. Dap 02131 Concrete Adhesive
The Dap 02131 Concrete Adhesive is a good product for work that needs to be done around the house.
If you have a few small repairing tasks, this product would be suitable. It’s highly durable and easy to use.
It works well with concrete and can also be used to bond loose stone steps in your garden.
What makes this adhesive very effective is how it will give off a sturdy finish that won’t result in any cracks after several months if you add it to new cement to replace over old cement.
Whether you have a swimming pool that needs repairing or your patio needs some patching up, the Dap 02131 Concrete Adhesive will take care of the job.
The drying time of a good adhesive is not necessarily short, but it could help to get the job done quicker. However, the drying time of the Dap 02131 Concrete Adhesive is not known. Therefore, I’d advise you to play it by the eye.
This product lacks a few elements compared to other adhesives. Therefore, I’d recommend it for home use.
If you’re working on a big construction project, instead opt for a product that is suited for large surfaces.
This adhesive is suitable if you are looking for a no-fuss, durable, and a strong adhesive to get the job done.
Our Best Concrete Bonding Agent Picks
1. SIKA Corporation 187782 Concentrate Bond Adhesive
This product works well as an effective and adaptable bonding agent.
It consists of impressive bonding ability, once applied to a surface, it creates a strong and durable bond.
The SIKA Corporation 187782 Concentrate Bond Adhesive is versatile. You can add it to your cement to strengthen the mixture. Some people also find that it works well when used as a spray-on bonding agent.
It’s suited to everyday use and can also be used to patch up walls or fill in holes.
If you’re looking for an excellent bonding agent for a patch job, the SIKA Corporation 187782 Concentrate Bond Adhesive is the answer. It seals effectively and creates an incredibly sturdy result.
Since this is a liquid bonding agent, you need to mix it with other cementitious products for making a perfect repair job.
On average, you should allow bond adhesive a 24-hour timeframe to dry. This may differ depending on the adhesive, its drying ability, and your project.
For its versatility and ease of use, it comes at the top as the best concrete bonding agent!
2. DRYLOK 22212 Latex Bonding Agent
The bonding agent from the DRYLOk comes at #2 of our list for the best concrete bonding agent. This is a strong bonding agent having waterproofing capability. This bonding agent can withstand a substantial amount of hit and cold which made it one of the most durable bonding agent both for indoor and outdoor applications.
If you are looking for an agent that can do your repair work and give you stress-free sleep for years to come, this is the ultimate choice!
It comes in cheap but works tremendously well when applied on concrete, masonry, walls, or even in the patio and driveways!
When other bonding products mess up if not applied precisely, this can be applied by an amateur. If you mistakenly apply it anywhere, soap and water will clean things up for you.
3. Larsen Products WCQ06 "Weld Crete" Concrete Bonding Agent
The Weld Crete bonding agent is another addition to our best concrete bonding agents list.
This product binds so firm that you can apply it on the painted wall and then apply the patching compound to make a perfect concrete repair!
If you are looking for an authentic product that can make your repair work easy, this is the go-to for you. It requires less preparation and less work for having the job done.
Whether you need to apply new concrete on the old building wall or need to repair the driveway or patio, this is the item that can bind the concrete with the older cured concrete easily.
4. Quikrete Concrete Bonding Adhesive
This product forms a permanent bond between concrete, and it is highly durable. When the Quikrete Glues and Cements Bonding Adhesive sets, it won’t break.
Although this adhesive is highly durable, it contains a thin consistency. Therefore, it won’t fill well.
It may be useful if you are considering to use it for sheetrock cracks. This is because it will add much-needed stiffness to the crack lines.
The QUIKRETE GLUES & CEMENTS works well with concrete resurfacing. However, when it is exposed to liquid, it turns white, even after drying for 24 hours.
This product is more suited for binding old concrete with new concrete.
If you are looking for a bonding agent that will save you time, you may be disappointed to find that this product needs a minimum setting period of 24 hours.
Although it takes longer to set unlike other adhesives, it’s considered an overall good product.
It gets smaller jobs done without resulting in breakage.
You may find that some people will opt for an adhesive that does exactly what they need instead of consisting of elements that will not be useful to them.
Therefore, if you’re looking for a suitable adhesive with a strong bonding agent, this will do the trick.
Most concrete adhesives serve a distinct function, while others are versatile and can be used for various repairs and on an array of surfaces.
There is no clear winner for the best concrete adhesive but we can recommend Loctite Adhesive and the Gorilla 5021801 Glue. The Gorilla glue adhesive contains an impressive formula that can bond the toughest surfaces together. Its high strength provides instant grab, making it a fast-drying adhesive. Unlike other adhesives, it also expands 3 times into the material, resulting in less product being used. It is suited for tough repairs as well as small repairs, such as the sole of your sneakers. Apart from its impressive bonding strength, it is also 100% waterproof.
When it comes down to the top 4 of the best concrete bonding agents list, it is not that hard to pick the most authentic and versatile one. The SIKA Corporation product undeniably wins in the bonding agent category of the year, hands down.
What is Concrete Adhesive?
Like other super strong glues that can hold anything to the surface, concrete adhesives are made to stick some other elements onto the concrete surface. They are mostly chemicals that react with the concrete to hold the foreign element on it firmly.
Well, you may have thought why not we use cement mixture to adhere to different elements to the concrete surface? Yes, you can do that but only when you are making the concrete block.
After the concrete is cured, using just the cement and sand mixture won’t keep things like iron, aluminum, or wood on the surface. That’s where concrete adhesives come in handy.
What is Concrete Bonding Agent?
Simply, bonding agents make the concrete stronger and stickier so that it holds up. These are made of different chemicals that increase the strength of the concrete so that when the concrete is poured and cured, it does not come out of the surface in pieces.
These are super helpful when you are making concrete surfaces on some heavy traffic areas like stairs, driveways, and garage. These are the areas where traffic remains heavy and generally, these are the most abused areas of your house. So, using concrete bonding agents for those surfaces can make the concrete more compact and strong so that it does not crack or break soon.
What is the best glue for concrete?
In our research, we have found the Loctite Power Grab as the most powerful and sticky adhesive for concrete that sticks to the surface within seconds. However, most of the products in our list passed the criteria on which we have chosen the best construction adhesive for concrete. So, you can get one according to your specific needs.
How to Glue Concrete?
Gluing concrete is not something to be afraid of. This is similar to other adhesion works. However, you need to follow some key steps to have a solid bond between the concrete and the material you are trying to glue to the concrete.
1. Clean the Concrete Surface
The first step is to clean the surface thoroughly. There should not remain any dust at all when you apply the concrete glue. So, a pressure washer is what we recommend for the task. If you don’t have one, you can use a brush and water hose to get rid of the dust.
2. Read and Follow the Instructions
Different construction glues come with different formulas and they work differently. So, you need to check the product label or the manual to learn the process. Some glues do not require any process other than pouring on the surface and holding the materials together for a few moments.
While some products come in two or three different bottles that you need to mix before application.
3. Make the Surface Abrasive
For better bonding between the materials, it is recommended to have the surface scratched up. Scratching up the surface will make the bond stronger and long-lasting.
You can use a simple wire brush or some screws to scratch up the surface a little bit. And, don’t forget to get rid of the concrete debris that you scraped from the surface.
4. Apply The Concrete Glue
Apply the glue on the surface according to the manufacturer’s instruction. When applying the glue, make sure you have the material close to your hand so that the glue does not cure before you hold the material against the concrete surface.
5. Let it Cure
After application, let the glue to cure for a day. How much time it needs to cure depends on various factors like humidity, temperature, and the ingredients used in making the glue. So, it should be written on the product package.