Moldy and dirty edges of the tile in your home look so unhygienic and unpleasant to the eyes, Right?
All of us, at any time of our life, feel eager to clean those filthy areas in our home.
We're here to help you out on how to clean moldy caulks with the best solution till date.
To make this article published, we had to go through a ton of contents on the internet and took us about 12 hours of study.
After consuming this piece, you'll get the answer of about half a ton of queries related to cleaning of caulk and sealant.
So, Let's dive into the work as both of us are really excited to make this happen, aren't we?
We've found twelve different methods on the internet about cleaning the moldy caulk and validated only three out of all. So, we'll discuss those three authentic ways of cleaning the caulk here.
Tools You Need For the Cleaning Process
- A Face Mask
- Rubber Hand Gloves
- Cleaning Brush
- Spray Bottle or Cotton Coil
- Bleach (Only for Method 1)
- Ammonia (Only for Method 2)
- Mold Killers (Only for Method 3)
Method 1: Cleaning Caulk Using Bleach
Out of the three modes, this is the most common and heavily used formula. I'll discuss the whole process on a step by step basis.
Step 1: Take Precaution
Before starting the cleaning process, you must have to take precaution first. Bleach, Ammonia and Mold Killers, all of these chemicals have harmful effects on the human body if it is touched.
Wear Goggles, Face mask, and the hand gloves to protect yourself from the bad effects.
A gentle reminder, since bleach is very reactive to the color of clothes, wear an old cloth for which you'll not mind ruining.
Step 2: Make Mixer
Make a mixer of 250 ml bleach with 4 liters of water. Use a stick to mix the bleach with water entirely.
Step 3: Fill The Spray Bottle
Fill the spray bottle with the bleach-water. Try to make some room in the spray bottle so that the air pressure remains even. Full bottle water can cause complications spraying the liquid.
Step 4: Spray to The Surface
Spray the liquid mixer on the moldy caulk. Try to avoid spraying the normal surface area of the shower or bathtub.
Step 5: Let it Sit
Let the liquid sit for an hour or so, and then take the brush to scrub the mold. When scrubbing the caulk with the brush, cover your body as much as possible.
Step 6: Rinse with Water
Rinse the caulking with tap water thoroughly and get a fresh new-looked shower in your sweet home!
See the video for visual understanding of the bonus tip process.
If the above-explained or you don't want to bother brushing the caulks with your hand, I have a great solution for you!
Instead of spraying the mixer in the caulk, you can soak cotton balls in the raw bleach for about a minute.
After soaking the cotton balls, place those bleach-soaked cotton balls on the moldy caulk. Leave the place for about an hour and guess what?
Just take the cotton balls out of the place and put those into the dustbin. You’ll get shiny white caulk in your shower, tub or window, wherever you apply the trick.
Method 2: Clean Caulk With Ammonia
So, you’re done with the first method and want to know more about the caulk cleaning process.
This method is not different than the other I’ve described earlier except the chemical.
We used bleach in the first method and here, we’ll use ammonia.
So, let’s dive in.
Step 1: Take Precaution
This is mandatory for all the methods we’re discussing here today. You must take precautions against these powerful chemicals bad effects on the body.
You should know that ammonia is a type of acid and touching this with the bare hand will leave you injured. So, I’ll recommend trying to follow the Method 1.
Step 2: Make the Mixer
Make a mixer of 50% ammonia with 50% water. Do the mixing process carefully with a stick or an iron rod. You can mix the water and ammonia in the spray bottle if you want.
Step 3: Spray the Mixer
Spray the mixer on the mold you want to remove. The same thing again, try to be focused as much as possible.
Step 4: Let them Sit
Leave the place for an hour to let the chemical sit on the mold. If you can give it a little more than the prescribed time, that will be better.
Step 5: Scrub and Rinse
Scrub the moldy caulk with an old brush and rinse with water. Moderate pressure on the brush can easily do the task.
Special Tip Again:
If the method with spray doesn't work well, follow the bonus tips from the first method. The method I've discussed there is the proved method working on any type of caulk, no matter how stubborn the mold is.
Method 3: Clean With Mold Killer
This will be the same process as the earlier two. So, I'll skip describing the common steps here.
- Take Precaution
- Put the store-bought mold killer into the spray bottle or simply plug in the sprayer into the mold killer bottle.
- Spray on the moldy caulk
- Let them sit for a while
- Scrub with a Brush
- Rinse the area with tap water
Now that we've learned three methods of cleaning the moldy caulk from shower, bathtub, and windows.
If you ask me about my choice among the three methods. I'll go with the first method with the Bonus Tip. The method I've written down in the bonus tip is the best cleaning process of caulk in any situation.
So, if you don't want to spend time following all those boring steps, Just go with the cotton ball process.